CCNA Boot Camp v2.0

ASPE-IT offers a full line of hands-on SharePoint training for complete implementation, management and usability for all key functions in your enterprise.

ASPE-IT offers real-world, independent training on Windows technologies giving you unbiased hands-on knowledge of the products.

Implemented correctly, virtualization technologies have the potential to create vast improvements in the utilization of IT resources.

See All Courses

ASPE-IT offers networking courses that focus on skills and knowledge of application development. The course you take will dissect the technology, and teaching you the protocols.

ASPE-IT provides premier hands-on Linux skills and certification training through its partnership with Red Hat.

Organizing & managing a company's vital information is one of the most extreme challenges in the IT sector today. We'll give you the knowledge and skills to find actionable data.

See All Courses

Protecting a company's vital information is one of the most important responsibility of today's IT Department. Get skills to fight todays most common attacks.

See All Courses

ITIL V3 Foundation Exam
Preparation Boot Camp

ITIL's best practices in IT Service Management enhance the cost-effectiveness of IT organizations, improve reliability and alignment with the needs of each business.

COURSE 68500 \| 5 PUBLIC SESSION CCNA Boot Camp v2.0 Course Outline Course Overview Course Outline Who Should Attend Cities & Dates
I. Building a Simple Network (ICND1) The Functions of Networking Securing the Network Host-to-Host Communication Model TCP/IP's Internet Layer TCP/IP's Transport Layer Packet Delivery Process Ethernet Connecting to an Ethernet LAN II. Ethernet LANs (ICND1) Challenges of Shared LANs Solving Network Challenges with Switched LAN Technology Packet Delivery Process Operating Cisco IOS Software Starting the Switch Switch Security Maximizing the Benefits of Switching Troubleshooting Switch Issues III. Wireless Local Area Networks (WLANS) (ICND1) Exploring Wireless Networking Understanding WLAN Security Implementing a WLAN IV. LAN Connections (ICND1) Functions of Routing Binary Basics Constructing a Network Addressing Scheme Starting and Configuring a Router Packet Delivery Process Router Security Using Cisco Router and Security Device Manager Using a Router as a DHCP Server Accessing Remote Devices V. Network Environment Management (ICND1) Discovering Neighbors on the Network Managing Router Startup and Configuration Managing Cisco Devices VI. Small Network Implementation (ICND2) Review Lab: Review of a Small Network Environment VII. Medium-Sized Switched Network Construction (ICND2) Implementing VLANs and Trunks Improving Performance with Spanning Tree Routing Between VLANs Securing the Expanded Network Troubleshooting Switched Networks VIII. Wide Area Networks (WANs) (ICND1) WAN Technologies Enabling the Internet Connection Enabling Static Routing Configuring Serial Encapsulation Enabling Routing Information Protocol (RIP) IX. LAN Extension into a WAN (ICND2) Establishing a Point-to-Point WAN Connection with PPP Establishing a WAN Connection with Frame Relay Troubleshooting Frame Relay WANs VPN Solutions X. Medium-Sized Routed Network Construction (ICND2) Reviewing Routing Operations Implementing VLSM XI. Single Area OSPF Implementation (ICND2) Implementing OSPF Troubleshooting OSPF XII. EIGRP Implementation (ICND2) Implementing EIGRP Troubleshooting EIGRP XIII. Access Control Lists (ACLs) (ICND2) ACL Operation Configuring and Troubleshooting ACLs XIV. Address Space Management (ICND2) Scaling the Network with NAT and PAT Transitioning to IPv6 Labs Lab 1: Using Host-Based Tools (ICND1) Use Windows applications and commands to investigate the IP configuration of your PC and the local network. Lab 2: Observing the TCP Three-Way Handshake (ICND1) Use packet sniffer software to observe the TCP initial Three-Way Handshake. Lab 3: Observing Extended PC Network Information (ICND1) Use PC Tools such as ping, traceroute, and ipconfig to gather network-related information. Lab 4: Connecting to Remote Lab Equipment (ICND1) Test and practice the connectivity for the equipment you will use for the remaining labs. Lab 5: Switch Startup and Initial Configuration (ICND1) Connect to your workgroup switch and complete the initial configuration. Lab 6: Configuring Expanded Switch Networks (ICND2) Expand the switch configuration to meet specific VLAN and network requirements. Lab 7: Troubleshooting Switched Networks (ICND2) Use troubleshooting methods discussed to diagnose, isolate, and correct common problems in a switched network. Lab 8: Enhancing Security of Switch Configuration (ICND1) Increase the security of the initial switch configuration. Lab 9: Using CDP (ICND1) Obtain information about your directly connected Cisco device using Cisco Discovery Protocol (CDP) and disable CDP from running on selected interfaces. Lab 10: Managing Router Startup Operations (ICND1) Make changes to control the router startup behavior, such as boot commands or configuration register settings. Lab 11: Managing Cisco Devices (ICND1) Learn to use the IOS Copy and Debug commands. Lab 12: Operating and Configuring a Cisco IOS Device (ICND1) Practice and demonstrate the use of the Command Line Interface (CLI) features. Lab 13: Converting Decimal to Binary and Binary to Decimal (ICND1) Test your ability to convert numbers from binary to decimal and decimal to binary. Lab 14: Classifying Network Addressing (ICND1) Classify network addresses and convert addresses from decimal to binary format or binary to decimal format. Lab 15: Computing Usable Subnetworks and Hosts (ICND1) Determine how to create subnets from a given IP address, how many hosts per subnet, and how many subnets per IP address. Lab 16: Calculating Subnet Masks (ICND1) Determine the subnet mask used based on specific criteria provided. Determine the binary and decimal format of the mask, subnet address, number of host addresses, and the Directed Broadcast address. Lab 17: Initial Router Startup (ICND1) Connect to your workgroup router and examine the startup process. Lab 18: Initial Router Configuration (ICND1) Connect to your workgroup router and complete the initial configuration. Lab 19: Enhancing Security of Initial Router Configuration (ICND1) Increase the security of the initial router configuration. Lab 20: Configure DHCP Server Functions with SDM (ICND1) Use the Cisco Security Device Manager (SDM) to configure DHCP server functionality on your workgroup router. Lab 21: Managing Remote Access Sessions (ICND1) Use Telnet and SSH to create connections to your workgroup devices. Lab 22: Connecting to the Internet (ICND1) Configure the WAN Ethernet Interface to use a DCHP-obtained address and perform Port Address Translation to the inside network. Lab 23: Connecting to the Main Office (ICND1) Configure your workgroup router to connect to another device via a serial interface using PPP and provide a static route to that device. Lab 24: Establishing a Frame Relay WAN (ICND2) Using the serial interface, create a Frame Relay connection to the Core. Lab 25: Troubleshooting Frame Relay WANs (ICND2) Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found in Frame Relay networks. Lab 26: Enable Dynamic Routing to Main Office (ICND1) Enable the workgroup router to use the dynamic routing protocol RIP. Lab 27: Implementing OSPF (ICND2) Configure your workgroup routers to use the dynamic routing protocol OSPF. Lab 28: Troubleshooting OSPF (ICND2) Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found when running the OSPF routing protocol. Lab 29: Implementing EIGRP (ICND2) Configure your workgroup routers to migrate from OSPF to EIGRP. Lab 30: Troubleshooting EIGRP (ICND2) Use troubleshooting methods discussed to diagnose, isolate, and correct problems commonly found when running the EIGRP routing protocol. Lab 31: Implementing and Troubleshooting Access Control Lists (ACLs) (ICND2) Create and troubleshoot IP ACLs. Lab 32: Configuring NAT and Port Address Translation (PAT) (ICND2) Configure your workgroup router to use PAT. Lab 33: Implementing IPv6 (ICND2) Allocate and configure IPv6 addresses on your workgroup routers. Lab 34: Implementing a Small Network (Review Lab) (ICND2) Configure your workgroup switch and router with a basic configuration based on the network information provided. Lab 35: Confirming the Re-Configuration of the Branch Network (Review Lab) (ICND1) Assume management of an incorrectly pre-configured network,reconfigure or correct it, and test your new network configuration for accuracy.